|
A Empresa /
The Company
Produtos / Products
Serviços /
Services
| |
|
 |
|
Battery Smart Charger
- Electric Power Source |
|
Description |
Battery Charger |
|
CRC - is the SunLab Power family of
Battery Smart Chargers. The same system
of intelligent battery charge that you have in solar system is available for
to connect to the grid.
Compact and light,
singular design and the new concept are revolutionary
if you compare with other conventional battery chargers. The great differential
results in the
capacity to recharge the most varied types of batteries, self controlled, fast
, low or floating charge and stops safely when the battery is charged. Easy to use, practical
to install.
Idealized mobile
vehicles applications, to
safely
recharge the battery in systems. CRC offers reliability, profitability, and
versatility to any installation.
CRC 1500, 2000 and 2500 applications
involve integrating power system in order to provide both
battery charging and DC power functions.
|
 |
|

|
|

|
Models:
CRC40, CRC1500, CRC2000 and CRC2500
CRC40:
Compact, CRC40 can charge
electrolyte batteries, 12 Volts in PWM mode, fast and safely all batteries capacity. CRC40
applications is suitable to vehicles, boats, security systems, tools and
onboard DC electronics, etc...
CRC1500:
For applications where you need
battery charging
and DC power integrated.
More powerful than CRC40, charges the battery in shorter
time. PWM mode and MPP (Maximum Power Point) available, provide self adjust to
better wave mode to battery.
The charge process can have a computer supervision if connected to the CRC
serial port.
CRC 2000: More powerful than CRC1500
with the same other characteristics.
CRC 2500: Include larger potency and DC
output has stabilization to consumption up to 6A.
Total electronic
circuit and micro processed, it can be connected on a grid in 110 or 220 V, 50/60Hz.
|
|
Characteristics |
-
SMART CHARGE:
Once connected to the battery, the charger analyzes the conditions,
determining which PWM (Pulse with Modulated Wave) stage will be used for the
charge: fast, slow or floated. The battery will be charged fast and safely.
-
SUPERVISION AND
CONTROL: Beyond the charge, the microprocessor remains reading and
controlling the voltage, current and temperature in short intervals
of seconds, learning and self adjusting the
MPP (Maximum Power Point), providing the most efficient
procedure to the charge.
-
SECURITY:
After the battery reaches the maximum voltage, the CRC
disconnect the charge circuit and remains supervising fluctuation process
(floating). In case of the voltage becomes low, CRC will go back to
recharge automatically. Different of other
conventional battery chargers CRC can be left functioning
permanently, without any risk of overload or damage to the battery.
-
COMPACT and LIGHT:
Contrasting with the voluminous and heavy battery chargers, CRC
are light and compact and suitable for mobile applications.
-
FLEXIBILITY: CRC Smart Chargers are
used where you need a product to maintain 12Volts batteries permanently
charged for use, independent of the capacity, deep or low discharge, of electrolytic composition.
-
CARES: CRC are manufactured for internal
use. Do not use to charge
batteries of cellular, NiCad or Lithium type, under risk of damage, and explosion of the battery.
|
-
GLOBAL CONCEPT: The firmware and algorithms
program, are a patented know how of the Sunlab Power - Lábramo Centronics
Division.
Product uses programmable microcontroller.
-
LOW
CONSUMPTION: PWM and MPP function provide the maximum energy
efficiency.
- Intelligent Battery Charger -
Micro controlled.
- Power Input: 110/220 VAC 50/60 Hz;
- Charge process self adjusted;
- PWM mode;
- MPP (Maximum Power Point);
- Permanently supervision of the
charge.
- Temperature, voltage
and current controller;
- Overload or high
draining battery protection.
- Protection against short circuit,
inversion of polarity and surge.
- Fail safe alarm, watch-dog and self resetable
system.
- Serial RS232 port to
computer connection.
- LED display.
- Compact and light.
SunLab provides other chargers that
will be suitable for a particular application, based on load type and size.
Contact us.
* Circuit and firmware LC patent
granted. |
|
|
|
|
Characteristics
|
|
 |
 |
|
Model |
CRC-40 |
CRC-1500 |
CRC-2000 |
CRC-2500 |
|
Part Number |
91.215 |
91.216 |
91.217 |
91.218 |
|
Input (Vac)
|
110/220 - 50/60 Hz |
110/220 - 50/60 Hz |
|
Output max. (Vdc) |
15 |
16,0 or 28,0 |
|
Current (min. - max.) (A) |
0,5 a 2 |
0,5 a 5 A |
0,5 a 10 A |
0,5 a 15 A |
|
Max Pulse Current of
Charge (min. - max.) (Ap) |
10Ap |
25Ap |
45Ap |
70Ap |
|
Rated Power (Watts) |
30W |
230W |
350W |
500W |
|
Charge Mode |
PWM |
PWM + MPC |
|
Sub Voltage Alarm |
NO |
YES |
YES |
YES |
|
Short Circuit Protection |
YES |
YES |
YES |
YES |
|
Polarity Inversion Protection |
YES |
YES |
YES |
YES |
|
Self Shut Down |
YES |
YES |
YES |
YES |
|
DC Power Function |
NO |
YES |
YES |
YES |
|
Output Stabilization |
NO |
NO |
NO |
YES |
|
Serial RS 232 Port |
NO |
RS232 C |
|
Display |
LED |
LED |
LED |
LED |
|
Voltmeter |
NO |
YES |
YES |
YES |
|
Working Temperature |
0 a
65º C |
0 a
65º C |
0 a
65º C |
0 a
75º C |
|
Installation |
DIN |
screws |
|
Dimension (mm) |
75
x 100 x 123 |
115
x 160 x 200 |
|
Weight (Kg) |
0,5 |
1,2 |
1,6 |
2,5 |
|
Warranty |
1 year |

-
Due to constant
improvement of technologies, the data and information can be changed
without notice.
-
Any doubt contact
Sunlab or our next authorized agent.
-
The
figures can not represent the product with allegiance..
-
Copyright Lábramo Centronics
-
Revision:
04/02/2011
|