Aviation Obstacles Beacons - AOB

Features:

AOB- Aviation Obstacles Beacons systems are critical in its applications, reliable equipments to mark any hazard  obstacles to air navigation.

Sunlab Power® ESR beacons are manufactured with materials of high quality and technology, from the league of the metals, polymeric and semi-conductors, allowing to obtain an effective balance with larger economy and reliability.

The high potency LED, results in low consumption, high durability, reducing to the minimum the maintenance costs and eliminating the change of lamps.

Another advantage is when you need to use a several strobe beacons:  ESR  circuit makes the automatic synchronization of the flashes, without any expensive synchronization or another accessory.

With the use of ESR beacon is recommended a CRC Smart Charger, a  micro-processor controller for battery charge and discharge. CRC  provides the safe operation even in black-out case, it provides stabilized power in, surge protection and many other advantages, giving the necessary security to the aircrafts, protecting lives and your capital.

Description: ESR beacons are built with the most recent technology in LED. It provides high brightness and reliability, allies to the low consumption. The technology incorporate to our AOB provides a life span of 100.000 hours.

Versatility: The low consumption of the LED and circuit allows to use several power sources as:
AC Input 110/220 - 50/60 Hz  - through  AC / DC Converter;
CRC Smart Charger for battery -  for "no-break" replacement;
PV - panel, solar system and other alternative power sources.
CSH Controller - a solar and power grid solution as hybrid system;
 

Application:  The beacons ESR and SR are suitable for luminous signaling of obstacles, assisting to  FAA, ICAO and ABNT standards. They are installed in the top of towers, chimneys, antennas, bridges, buildings, wind turbines and other obstacles that can cause danger to the aircrafts, allowing that is visualized at great distances.

Advantages: The low consumption and inexistent maintenance, give them a great advantage over  similar products. High light intensity, electronic circuit, automatic switch on/off and photo sensor built in. Synchronization when installed in group. Have no movable parts them have no mechanical wear.

ESR line AOC are the most recent technology in solid state light emitters. They are light and compact, the electronic circuit incorporates protection and photo sensor for automatic switch off and on.

Potency: ESR / SR have several light intensities, colors, and continuous (omni directional) light or strobe effect (FLASH). The light intensities and potencies are applicable to the standards demands. Customized AOB is possible under consult.

Features

• Light emitter life span can give you up to 100.000 hours.
• No lamp maintenance.
• Low consumption.
• Power can be supplied by a small PV panel.
• Automatic operation, no human interference.
• All electronic parts.

Characteristics

ES2R

SR2

ES4R

SR4

ES12R

ES24R

ES60R

981.203

981.206

981.205

981.207

981.210

981.220

981.230

Light Intensity class

360º

360º

360º

360º

360º

Mode and Intensity

Min.

(Cd)

2.600

6.500

17.200

66.200

White

Daytime=

200.000

Twilight=

32.200

Nighttime

12.000

700

1.800

12.300

58.000

1.800

2.400

6.000

12.000

1.200

2.700

6.100

12.200

1.300

2.250

8.500

17.000

450 mA

0,70 mA

450 mA

0,70 mA

1,0 A

2,0 A

3,5 A

• Low intensity: 10 Cd up to 1599Cd (Cd=candela).

• Medium intensity: 1600 Cd. up to 99.000 Cd

• High intensity: Over to 100.000 Cd